CHOOSE YOUR PEGBOARD TYPE

Please note! Parts from one type of Pegboard are not compatible with another type.

CHOOSE THE RIGHT FIT

IKEA SKADIS

SKADIS boards use elongated slots instead of round holes. This is the fastest way to identify the system.To make sure you are choosing the right accessories, compare your board to the diagram. Check the slot shape first, then confirm the slot size and spacing shown in the specs. If you can, measure the spacing from the center of one slot to the center of the next.

If your board matches these measurements, select SKADIS-compatible accessories for a secure, stable fit that won’t wobble or slip over time. If the shape or spacing doesn’t match, switch to the 1/4" pegboard tab to avoid ordering parts that won’t fit your board.

Questions about compatibility? Contact us.

SKADIS Key Measurements:

CHOOSE THE RIGHT FIT

1/4" Pegboard

1/4 inch pegboards use round holes instead of slots. This is the fastest way to identify the system. To make sure you are choosing the right accessories, compare your board to the diagram. Check the hole diameter first, then confirm the center to center spacing shown in the specs. Some boards can vary slightly depending on the manufacturer, so measuring helps avoid fit issues.

If your board matches these dimensions, choose accessories made for 1/4 inch pegboards for a secure, stable fit. They are designed to sit correctly and stay in place during everyday use. If the hole size or spacing does not match, switch to the SKADIS tab to avoid ordering parts that will not fit your board.

Questions about compatibility? Contact us.

1/4" PEGBOARD KEY MEASUREMENTS:

HOW IT WORKS

Modular System That Grows With You

01.

Place Item Back

Locate the rectangular opening on the back of the accessory. Place the back piece behind the pegboard and align it with the slot.

02.

Insert the Hook

Push the hook through the slot until it sits flat and feels firmly seated.

03.

Twist 90° to Lock

Twist the hook 90° to lock it in place for a stronger, more stable hold.

01.

Place Item Back

Locate the rectangular opening on the back of the accessory. Place the back piece behind the pegboard and align it with the slot.

02.

Insert the Hook

Push the hook through the slot until it sits flat and feels firmly seated.

03.

Twist 90° to Lock

Twist the hook 90° to lock it in place for a stronger, more stable hold.

Get Set Up in Minutes

Command Strip Mounts
No-drill option

Command Strip Mounts

A renter-friendly setup for lighter loads. We’ll show strip placement, quick leveling, and how to press and set the board so it stays put.

Wall Mount Installation
Most secure

Wall Mount Installation

Best for heavier loads and daily use. Walkthrough includes spacing, leveling, and fastening to studs or anchors for a strong, long-term hold.

Add Lower Supports
No-drill option

Add Lower Supports

Optional add-on for SKÃ…DIS that reduces flex and wobble. Especially useful if your setup gets bumped, or you store heavier items toward the bottom.

Faq

Everything you need to know before you buy

SKADIS boards use vertical oval slots. Standard pegboards use evenly spaced round 1/4" holes. If unsure, measure the hole shape and spacing and compare to our listed specifications.

No. Each accessory is engineered for a specific pegboard system.

Most products slot directly into place. Some larger or specialty items may require simple assembly for added durability.

No. Our mounts are designed to fit securely without damaging properly installed pegboards.

Yes. All Just Hanging accessories are designed to work together within the same pegboard system.